How excited are you for the live action Beauty and the Beast movie? The rose is such a quintessential part of the story and that’s why this DIY Beauty and the Beast enchanted rose cloche was the obvious choice for an awesome piece of home decor!
Affiliate links may be used in this post. Ordering a product through these links may result in a commission at no extra cost to you. Read the full disclosure here.
While Alice in Wonderland will always hold the number one spot in my heart, I do love Beauty and the Beast. Belle is nerdy and inquisitive but show true strength time and time again. This is why I am so excited that Beauty and the Beast is the focus of this month’s Movie Monday Challenge!
DIY Beauty and the Beast Enchanted Rose Cloche Materials
Step 1
Remove all of the packaging from the cloche.
Step 2
Set the dome off to the side.
Step 3
Pull the leaves off of your rose.
Step 4
Cut your rose stem so that it is shorted than the dome of your cloche.
Note:
- For my rose this was right under the highest bunch of leaves.
Step 5
Bend your rose into the shape of the rose from Beauty and the Beast. See the picture above if you need a refresher.
Step 6
Trim some of the petals off of your rose.
Tip:
- You only need 2 petals for the remainder of the project. However, my rose was too full so I trimmed more petals than that off.
Step 7
Glue a small leaf to the stem of your rose as pictured.
Step 8
Attach the bottom of your rose stem to the center of your cloche base with hot glue.
Tips:
- This takes a lot of glue so don’t be stingy with it.
- Be sure to hold your stem upright while the glue cools.
- You also need to continue adding glue until your rose is stabilized.
Step 9
After your glue is dried you may need to readjust your rose slightly. Check the cloche and make sure that the rose isn’t touching the sides. If it is, bend your stem slightly.
Step 10
Next, trim 2 of the rose petals you cut off so that the edges are rounded.
Step 11
Then use the trimmed petals to cover the glue at the base of the stem.
Step 12
Place the dome back on the base of the cloche.
Step 13
Cut the bottom of your drawer pull with the wire cutters so that it sits flush against the top of your dome.
Step 14
Lastly, glue your drawer pull to the top of your dome.
This is so elegant. If you want to up the magic you can add fairy lights to the inside but I love the classic and elegant look of simply the rose. A DIY Beauty and the Beast enchanted rose cloche is the perfect way to add some covert nerd décor to your home. Before you rush out to buy the materials to make your own, stop by and take a look at the other amazing crafts and recipes. You are going to be singing “Be Our Guest” all week long!
See where I’m linking up!
Don’t Forget to Pin It!
