Watching a new season of The Walking Dead on Netflix is seriously perfect to get you in the Halloween spirit.(If you’re a fan, don’t miss these awesome free trivia printables for Season 1, Season 2, and Season 3 from Erlene @ MyPinterventures) Soon the weather will be turning and then it is time to start pulling out the spooky décor, screening Hocus Pocus, and making costumes. Start planning your October style now by making this pretty spooky DIY jack-o-lantern bracelet. It is an easy seasonal piece to rock with an everyday fall outfit or an entire Halloween ensemble.

Affiliate links may be used in this post. Ordering a product through these links may result in a commission. Read the full disclosure here.

[bctt tweet=”Start planning your October style now by making this pretty spooky DIY jack-o-lantern bracelet!” username=”diyadulation”]

Materials

Clear Thread
1” Jack-O-Lantern Beads (x2) I got all of my beads from Michaels
10 mm Ceramic Orange Swirl Beads (x8) I got all of my beads from Michaels
8 mm Cranberry Glass Beads (x6) I got all of my beads from Michaels
7 mm Chocolate Glass Beads (x6) I got all of my beads from Michaels
Gold Lobster Clasp
Gold Jump Ring
Scissors or Small Wire Cutters (from your jewelry tool set)

Step 1

Cut a piece of thread 24” long.

Step 2

Slide your jump ring onto the thread and center.

Step 3

Match the ends of your thread together and thread through one of your jack-o-lantern beads.

Step 4

Next, thread on one of your ceramic orange swirl beads followed by a chocolate bead.

Step 5

Thread on a cranberry bead next.

Step 6

Thread on another ceramic orange swirl bead.

Step 7

Thread your next beads on in the following order:

Cranberry

Chocolate

Orange Swirl

Chocolate

Cranberry

Orange Swirl

See the photo above for reference.

Step 8

Add your second jack-o-lantern bead followed by an orange swirl bead, a cranberry bead, and a chocolate bead.

Step 9

Thread the last beads on in the following order:

Orange Swirl

Chocolate

Cranberry

Orange Swirl

Cranberry

Chocolate

Orange Swirl

Again, see the photo for reference.

Step 10

Pull your beads taut and attach your lobster clasp. Do this by running your thread through the eye of the clasp and then through the orange swirl bead next to it. Again, pull the thread taut.

Step 11

Next, pull the loose ends of the thread off to the sides as pictured and tie them in a double knot between the orange swirl bead and the chocolate bead.

Step 12

Carefully trim the excess thread.

Tip:

Wire cutters from your jewelry tool set work best for this. Scissors will do the job but it can be difficult to get between the beads.

Now you have a beautiful and fun piece of wrist candy! This is so easy to make and a perfect way to celebrate the Halloween season. Bonus points if you pair it with a kitschy Halloween sweater. Don’t forget that if the jack-o-lantern beads are a little too spooky for your tastes change them out for large witch hats or cute spiders. Keep in mind that the size of the beads adjusts the length of the bracelet. If the new beads you choose are significantly smaller than the jack-o-lanterns simply add additional round beads to keep the length.

Want the Halloween crafts to keep going? Check out how to make this recycled jack-o-lantern treat jar or this gorgeous skull treat stand!

See where I’m linking up!

Let’s face it: wands are cool. Whether you are a fairy princess or off to Hogwarts, there is nothing better than twirling that pretty little stick in the air and adding a bit of magic to life. I will be 30 years old this year and I still get giddy when I see a sweet new wand to play with. You may not share my childlike joy of these toys but your kids certainly do. Keep them entertained before the fireworks show with these awesome (and totally shiny) patriotic firecracker wands.

Affiliate links may be used in this post. Ordering a product through these links may result in a commission. Read the full disclosure here.

Let's face it: wands are cool. Keep your kids entertained before the fireworks show with these awesome (and totally easy) patriotic firecracker wands.

[bctt tweet=”Wands are cool. Keep kids entertained before the fireworks with patriotic firecracker wands. #diy #patriotic” username=”diyadulation”]

Let's face it: wands are cool. Keep your kids entertained before the fireworks show with these awesome (and totally easy) patriotic firecracker wands.

Materials

Thick Patriotic Straws (I got mine at the dollar store)
Red and/or Silver Star Garland
Red, Silver, and Blue Gift Ribbon
Hot Glue Gun and Glue Sticks
Scissors

Step 1

Remove packaging and stickers from everything. This makes it much easier when you are cutting ribbon and garland later.

Step 2

Cut a strip of silver garland the length of your straw.

Step 3

Next, cut three strips each of the red and blue gift ribbon. These should also be cut the length of your straw.

Let's face it: wands are cool. Keep your kids entertained before the fireworks show with these awesome (and totally easy) patriotic firecracker wands.

Step 4

Wrap the end of your garland around the end of all 6 strands of ribbon.

Tip:

Only wrap the garland once or twice around the ribbon and securely tighten. Next, bed the excess wire (the shorter piece) away from the wrap and towards the shorter end of your ribbon.

Let's face it: wands are cool. Keep your kids entertained before the fireworks show with these awesome (and totally easy) patriotic firecracker wands.

Step 5

Slide the end of the strands into the straws up to where they are wrapped (including your garland strand). Add hot glue on the tip of the straw where the strands are inserted.

Let's face it: wands are cool. Keep your kids entertained before the fireworks show with these awesome (and totally easy) patriotic firecracker wands.

Step 6

Next, rotate your straw and apply more glue. When you have finished, the entire tip of the straw where the ribbon and garland are inserted should be covered with hot glue.

Let's face it: wands are cool. Keep your kids entertained before the fireworks show with these awesome (and totally easy) patriotic firecracker wands.

Step 7

Using the blade edge of your scissors, curl your gift ribbon.

Tip:

If you don’t know how to do this, place the blade of your scissors at the base of a strand of ribbon. Pull the ribbon taut then drag the blade to the end of the ribbon keeping it taut against the blade the entire time.

Let's face it: wands are cool. Keep your kids entertained before the fireworks show with these awesome (and totally easy) patriotic firecracker wands.

Step 8

Wrap the piece of garland loosely around your finger to create a corkscrew.

Let's face it: wands are cool. Keep your kids entertained before the fireworks show with these awesome (and totally easy) patriotic firecracker wands.

Step 9

Repeat steps 2 through 8 until you have created the desired number of wands wanted for your party.

Let's face it: wands are cool. Keep your kids entertained before the fireworks show with these awesome (and totally easy) patriotic firecracker wands.

How colorful and festive are these little cuties? They are super easy to make and so much fun to play with. Even though it isn’t the fourth yet, I’ve already been twirling them around the house with the kiddos. They are also responsible for the awesome Harry Potter marathon we had last weekend (worth every minute). Make sure that you make enough wands that you can get in on the action. It is such an easy way to connect with your kids. Don’t miss our 4^th of July page if you want even more fun patriotic crafts or need some festive food for your celebration!

See where I’m linking up!

Everyone seems to be so on top of things for Mother’s Day and then Father’s Day rolls around and you’re scratching your head thinking, “How did it get here so fast?” At least, I hope it isn’t just me that this happens to. This year, I think I’ve finally figured out why. Father’s Day falls in the summer right after the kids have gotten out of school; your routine gets thrown for a loop, and before you can get things back under control BAM! It is upon you and you are so not prepared. This year, to help you (and me) out, I’ve curated a list of 20 DIYs for Father’s Day that range from simply printing out something to a more elaborate but inexpensive craft. No matter where you find yourself on the spectrum you will find something here to celebrate dad!

Get ready to rock your last-minute gifts! Here's a list of 20 DIYs for Father’s Day that range from simply printing something to an inexpensive craft.

[bctt tweet=”Get ready to rock your last-minute gifts with 20 DIYs for Father’s Day! #fathersday #diy” username=”diyadulation”]

Crafts

This awesome craft idea from Lynda Creates is so cool it would be a perfect gift anytime of year. It has all the components you’re looking for: useful, organized, and pretty!

If your dad is into cars, this easy art is the perfect gift for him. Get all of the details for how to make it over at Love, Create, Celebrate.

These DIY leather coasters, also from Love, Create, Celebrate, are practical and chic. Great for the dad who loves receiving useful gifts!

I absolutely love this punny papercraft from Crafting in the Rain! It pairs perfectly will a new drill bit set for dad.

Okay, can you say genius?! This DIY hammer coat rack from The Kim Six Fix is brilliant for storing more than just coats. Check out the other awesome uses for it on the post!

Got a papa that loves hitting the links on Father’s Day? Surprise him with these super-clever bookends from Ann’s Entitled Life!

If Dad is the grilling king, give him this awesome apron and delicious dry rub from Building Our Hive. If you’re lucky, he may even whip you up a delicious meal to say thanks!

Cards and Printables

This personalized photo card from Happy and Blessed Home is super sweet and easy to make. It is a great card for little ones to give.

Making your own greeting cards is such an easy way to give a thoughtful and personal gift. I love this one from Nutz About Stamping.

My papa loves drinking his soda from a glass bottle and these printables from Bargain Shopper Mom are an easy way to add some pizazz to a six pack for him.

This easy gift does double duty. Fill it with Dad’s favorite sweets and once he finishes them, he still has a useful cup to sip from. Find the printable at Simply Designing Porch.

You can also skip the tumbler altogether and just print out this bad boy from Baby Loving Mama. Slap it on Dad’s favorite candy bar and call it a day. It is the perfect easy gift for kids to give, too.

All of the free Father’s Day printables at the Crafty Blog Stalker are absolutely stunning. Print them out and frame them to have your perfect gift and card in one.

If you still want a traditional card to go along with your gift, these printable ones from The Joys of Boys are perfect. Simple, pretty, and to the point dads will love them.

You can also download this awesome one from yours truly! It is designed to print on a regular 8.5 x 11 sheet of white cardstock so there’s no trimming involved. Simply print on both sides and fold. Perfect for the tool-loving dad, let him know that he totally “nailed it”!

This is another great card from Nutz About Stamping! (She creates such great stuff.) Whether your dad’s into nautical stuff or not, he’ll love how beautiful it is.

Treats and DIY

If you’re looking to really spoil papa this year, this gift basket from Melly Moments is the way to go. Super cute, it’s filled with all kinds of fun stuff for the grill man.

Dads are hard workers! Give them a well-deserved pampering with this homemade dry hands salve from A Cultivated Nest.

Who doesn’t love rice crispy treats? This is a fun and festive way to dress up a classic. Find out how they’re made at SweepTight!

Last, but certainly not least, are these awesome “Man Pucks” from Homespun Engineer. They are super easy to make and super useful.

Now you have tons of options to totally surprise Dad this year. If you’re still craving more you can check out our Father’s Day page. You can also check out any of the Merry Monday link parties for tons of ideas and inspiration!

See where I’m linking up!

Pretty Spooky DIY Jack-O-Lantern Bracelet

Materials

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Step 12

Patriotic Firecracker Wands

Materials

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

20 DIYs for Father’s Day

Crafts

Cards and Printables

Treats and DIY